Site Development & Site Preparation in West Texas

Apex turns raw acreage into a build-ready site: clearing, grading, drainage, and earthwork engineered to the tolerances a commercial or industrial build stands on. Based in Midland, self-performing the work across the Permian Basin under one contract with full liability.

Request a Bid Call (432) 279-0113

The Ground-Up Phase

Every structure inherits the site it sits on.

A pad graded to the wrong elevation or soil compacted below spec forces expensive rework once the structure is up. Apex develops the site to engineered tolerances before a single foundation is poured, so everything above it starts on solid, build-ready ground.

Most site work contractors handle the prep and hand the site to someone else. Apex crews stay through utilities, concrete, and the structure itself, so the site is prepared for what is actually going on it rather than to a generic standard.

Because Apex carries the whole build, the site is developed to set up the underground utilities, foundations, and structure that follow, all under one contract.

[ Site / earthwork photo ]

How It Goes

From raw dirt to build-ready.

Survey & Plan

Grading targets and drainage are set from the engineering plans up front.

Clear & Strip

Brush, debris, and unsuitable material are cleared to expose the ground.

Grade & Compact

Cut, fill, excavation, and compaction establish the pad and elevations to spec.

Hand Off

The finished site is handed to underground, foundations, and structure.

What It Covers

The full site development scope.

Every part of turning raw acreage into a site ready to build on, handled under one contract with full liability.

One contractor, site to structureBecause Apex carries the whole build, the site is developed to set up every phase that follows it.

Clearing & Grubbing

Removing brush, debris, and obstructions to open raw acreage for grading and construction.

Grading & Earthwork

Cut, fill, and compaction that establish the pad and elevations to engineered tolerances.

Drainage

Grading and drainage designed so water moves off the site the right way, before the build.

Site Excavation

Construction site excavation for pads, foundations, and utility routes, cut to line and depth.

Access & Lease Roads

Caliche and access roads built so equipment can reach the site and keep reaching it.

Site Prep for Build

The graded, compacted, drained site handed off ready for foundations and structure.

Where We Work

Site work across the Permian Basin.

Apex is based in Midland and develops sites across West Texas.

Midland & Odessa

Crews and equipment local to the basin, so mobilization does not eat the schedule.

The Oilfield Corridor

Big Spring, Andrews, Pecos, Monahans, Crane, and the lease sites in between.

Wider West Texas

Lubbock, San Angelo, and Hobbs, New Mexico for projects that fit.

Local Ground Conditions

Caliche, drainage, and wind exposure factored into the plan rather than discovered later.

Common Questions

Frequently asked questions

What does site development include?

Apex site development covers clearing and grubbing, grading and earthwork, drainage, site excavation, and site prep across West Texas. It turns raw acreage into a build-ready site graded and compacted to engineered tolerances, so the foundations and structure built on it start on solid ground.

Is site preparation the same as site development?

They usually mean the same work. Site preparation, site work, and site development all describe getting raw ground ready to build on: clearing, excavation, grading, drainage, and compaction. Apex handles the full scope regardless of which term the plans use.

Can Apex develop a large-acreage site?

Yes. Apex develops large sites from raw dirt across the Permian Basin, including clearing, grading, drainage, and earthwork to engineered tolerances. Developers managing large acreage hand off the whole site so they get one accountable contractor.

Does Apex build the access roads into the site?

Yes. Caliche roads, lease roads, and access roads are self-performed by Apex crews. On remote Permian Basin sites the access road is often the first thing built, because nothing else can start until equipment can reach the pad and keep reaching it.

Does Apex self-perform the site work or subcontract it?

Apex crews do it. Clearing, excavation, grading, drainage, and compaction are all self-performed rather than handed to a separate site work contractor, so the schedule does not wait on someone else and the tolerance is not lost in a handoff.

Does site development connect to the rest of the build?

Yes. Site development is the first phase of Apex civil construction, and because Apex carries the whole build, the site is developed to set up the underground utilities, foundations, and structure that follow.

Explore More

Related construction services.

Site development is the first phase of the civil scope Apex self-performs.

Have a site to develop?

Tell us about the acreage and the build. You will get a straight answer on scope and how Apex would take it from raw dirt to build-ready.